Constant temperature water baths designed for Reid Vapor
Pressure determinations of liquid petroleum products and
liquefied petroleum gases (LPG). Immerses vapor pressure
apparatus at the proper depth per ASTM specifications.
Controls bath temperature with ?0.1?C (?0.2?F) precision.
Microprocessor PID control provides quick temperature
stabilization without overshoot, and bath is protected by an
over-temperature control circuit that interrupts power
should bath temperature exceed programmed cutoff point. Dual
LED displays provide actual and set-point temperature values
in ?C/?F format. Double wall construction with fiberglass
insulated stainless steel tank. A sturdy 25mm (1") flange
permits flush-mounted bench top installation for easy access
to bath interior. Built-in holders suspend test cylinders at
the required depth. Equipped with overflow stand pipe/drain.
Conforms to:
ASTM D323, D1267; GPA
2140; IP 69, 161; ISO 3007, 4256; DIN 51616, 51754; FTM
791-1201; NF M 07-007, 41-010.
Capacity:
1 to 4 vapor pressure apparatus, one-opening or
two-opening type
Temperature Control
Stability:
?0.1?C (?0.2?F)
Maximum Temperature:
100?C (212?F)
Bath Medium:
51.9 L (13.7 gal) water
Electrical Requirements:
115V,
50/60Hz, Single Phase, 18.8A ,20?240V, 50/60Hz, Single
Phase, 9.4A
Dimensions:
38.1L x
38.1W x 91.5H cm (15 x 15 x 36")
Shipping
Weight:
47.7 kg (105 lbs.)